Antennas & Cables: dBi Gain, Cable Loss per Metre, Connectors & EIRP
This lesson is part of the course
In this lesson
You look up the cable loss for four antenna sites from a two-way table, calculate the EIRP of each site, measure the headroom to Halden's design cap and colour the sites that exceed it.
Buy the course once for $9.99 to unlock every lesson and lab, the final exam and the certificate – lifetime access, no subscription.
Lessons in this course
- Decibels for Radio: mW to dBm and Back, Adding Gains & Losses Locked
- Free-Space Path Loss: Distance, Frequency & the 6 dB Rule Locked
- Antennas & Cables: dBi Gain, Cable Loss per Metre, Connectors & EIRP Locked
- Walls & Floors: Obstacle Losses by Material and the Indoor Path Budget Locked
- Receiver Side: Received Power, Sensitivity, Fade Margin & Pass/Fail Locked
- Range Solving: Maximum Distance for a Required Margin, Range per Band Locked
- Data Rate vs Signal: SNR, an Approximate Rate Lookup & Throughput per Device Locked
- Coverage Plan: Access Points per Floor, Worst-Room Check & a Margin Chart Locked