Feed Rate: IPM = RPM × Chip Load × Flutes, Cut Time & MRR
This lesson is part of the course
In this lesson
You turn chip loads into table feeds for six tools, work out how long each cut takes, calculate the metal removal rate of a pocketing pass and back-calculate the chip load of an old program.
Buy the course once for $9.99 to unlock every lesson and lab, the final exam and the certificate – lifetime access, no subscription.
Lessons in this course
- Inch, Millimetre & Fraction Conversions for the Shop Floor Locked
- Spindle RPM from Surface Speed: SFM, m/min & Tool Diameter Locked
- Feed Rate: IPM = RPM × Chip Load × Flutes, Cut Time & MRR Locked
- Tolerances & Limits: Max/Min Sizes, Pass/Fail and Fits Locked
- Bolt Circle Coordinates with SIN, COS & a Scatter Plot Locked
- Taper Calculations: Taper per Inch, per Foot, Angle with ATAN & Tailstock Offset Locked
- Drill Point Depth & Sine Bar Setups Locked
- Cycle Time & Job Quote with a Chart Locked